RGB Spectrum Quadra User's Guide - Manual (Page 73)

C O M M A N D L I N E I N T E R F A C E
Command Summary
350-7951 Quadra User’s Guide 65
.
. .
.
.
DISPLAY
. . . . . . . . . COMMANDS
Display commands apply to positioning and visibility, and enable you to control
the display configuration, zoom and pan operations, freezing inputs and more.
A summary of commands is listed below. Click the desired command to access
detailed instructions.
Refer to the “ Display Commands Descriptions ” section for a complete
description of all positioning, visibility and display commands.
Table 4-6. Display Commands Summary
Command Description
OVerScan Performs an automatic 2% enlargement on video inputs only.
PAN Activates the pan utility for the selected input.
POSition Allows you to move an input window around the output display.
ResetSourceRectangle Resets source rectangle to default values.
SETRATE Determines the number of pixels an output rectangle moves with the
POSition command.
SIZE Activates size utility to resize the specified input.
UDC Configures Quadra to route full size images to each output.
UNderScan For the specified input, turns the Underscan feature on and off.
VideoAspectRatio Identifies “letterbox” inputs to display without black borders.
VideoInterlaceFiLteR Selects the type of de-interlace filter for the specified input.
WALL Configures Quadra to route 1/4 size images (quadrants) to each output.
WindowDestinationRectan
gle Sets both the position and size of an input’s destination rectangle.
WINdowENable Turns the specified channel on or off.
WindowSourceRectangle Sets the source rectangle for the selected input.
ZooM Activates the zoom utility.