RGB Spectrum Quadra User's Guide - Manual (Page 125)

TE C H N I C A L S P E C I F I C A T I O N S
General Specifications
350-7951 Quadra User’s Guide 117
.
. .
.
.
ANALOG INPUT
. . . . . . . . . SPECIFICATIONS
The table below lists high resolution graphics analog input specifications:
COMPOSITE VIDEO
INPUT
. . . . . . . . . SPECIFICATIONS
The table below lists composite video input specifications:
Table E-3. Analog Input Specifications
Parameter Specification
Type Analog RGB/YP
b
P
r
Analog video RGB/YP
b
P
r
, interlaced or non-interlaced
Video level Nominal 0.7V p-p (1.0V p-p)
Input impedance 75 ohms
Sample rate Up to 162 Msamples/sec
Sync type Available sync types:
• 3 wire (Sync On Green)
• 4 wire (Separate Composite Sync)
• 5 wire (Separate H and V Sync)
Sync level 0.3V p-p (3 wire), 5V p-p (4 and 5 wire sync)
Analog HD video
Video level 1V p-p (sync and video)
Sync Tri-level
Sync level 0.6V p-p
Connector type Sub miniature D connector type HD-15
Table E-4. Composite Video Input Specifications
Parameter Specification
Format Composite, NTSC RS-170A or PAL CCIR 624
Number Up to eight composite channels (see S-Video specifications for details).
Input sampling All inputs sampled as 3:2 pixels (CCIR 601 sampling)
Video levels 0.5 to 2.0V peak-to-peak; 1.0V peak-to-peak nominal
Sync levels 0.3 to 0.6V peak-to-peak
Connector type BNC female