Ratoc Systems U2SCXU - Manual (Page 15)

Windows
10
5)A warning message will appear again. Click [Continue Anyway].
6)The following wizard will appear. Click [Finish].
7)You have now completed installing the RATOC original driver. To confirm
the installation is successful, right-click [My Computer] from the [Start]
menu and select [Properties] from the pull-down menu. Click the [Hard
ware] tab and click [Device Manager]. If you can find a [RATOC U2SCX
USB2-SCSI Converter] string without any “!” marks or “?” marks under
the [SCSI and RAID controllers], and [RATOC USB MassStorage
Device WDM(withMPD)] string without any “!” marks or “?” marks under
the [Universal Serial Bus controllers], the installation has completed
successfully.
8)If you remove the U2SCXU
from a PC, proceed to 2-7.
Some utility comes with
the U2SCXU.
For more information on it,
refer to Chapter 3.