Ratoc Systems U2SCXU - Manual (Page 65)

Macintosh
60
B.Firmware update Utility
The latest firmware date file will be available on the web site:
(http://www.ratocsystems.com/english)
In order to update the firmware on the U2SCXU, follow the steps:
1)Click the [Select firmware data] button.
2)Select a new firmware data file(The extension of a firmware data file is “frm”)
and then click [Open].
3)Click the [Start Firmware update] button.
4)The following window will appear. Click [OK].
5)Remove the U2SCXU from the Mac and turn off the SCSI device attached to
the U2SCXU.
6)Click the [Quit U2SCX Utility] button. The following window will appear.
Click [OK].
7)Turn on the SCSI device and connect the U2SCXU to the Mac. Your settings
now starts working