Ratoc Systems U2SCXU - Manual (Page 92)

87
[For Windows Me users]
1.A wizard will appear after you have finished installing the driver for the
U2SCXU. Select the [Specify the location of the driver(Advanced)]
option and click [Next].
2. Select the [Display a list of all the drivers in a specific location, so you
can select the driver you want] option and click [Next].
3.Select [Imaging Device] from the list and click [Next].
4.Click the [Have disk] button.
5.Specify the location where the scanner driver exists and then click [OK].
6.Make sure the model name you have specified is shown on the list and then
click [Next].
7.Click [Next].
8.Click [Finish]. You have now completed the driver.