Ratoc Systems U2SCXU - Manual (Page 59)

Macintosh
54
B.Firmware update Utility
The latest firmware date file will be available on the web site:
(http://www.ratocsystems.com/english)
In order to update the firmware on the U2SCXU, follow the steps:
1)Before you start this utility, you need to make sure of the following points:
a)Open [Extensions Manager] at [Control Panels].
b)Make sure your setting is [U2SCX Configuration] you made at step 3)
in Chapter 3-2-1.
c)Make sure the following drivers are enabled.
-U2SCXUsermodeDriver
-U2SCXUsermodeUTDriver
d)Make sure the following drivers are disabled.
-USB Authoring Support
-Authoring Support
-Disc Banner Extension
2)Make sure the U2SCXU is removed from a Mac and start the U2SCX
Utility at the [U2SCX] folder. The following window will appear. Connect
the U2SCXU to the Mac and click [OK].