Ratoc Systems U2SCXU - Manual (Page 64)

Macintosh
59
A.Config Utility
You can configure settings for a SCSI device with the utility shown in the
previous page. Refer to A in Chapter 3-1-1 for each item.
1)Click the [Start Configuration setting] button.
2)The following window will appear. Click [OK].
3)Remove the U2SCXU from the Mac and turn off the SCSI device attached to
the U2SCXU.
4)Click the [Quit U2SCX Utility] button. The following window will appear.
Click [OK].
7)Turn on the SCSI device and connect the U2SCXU to the Mac. Your settings
now starts working