Ratoc Systems U2SCXU - Manual (Page 55)

Macintosh
50
7)The following window will appear. Click [Quit].
8)You can find the [U2SCX] folder created at the destination you have made
sure of it at step 6. Start U2SCX utility. The following window will appear.
If you have the U2SCXU removed from a Mac, reconnect it.
If you have already removed the U2SCXU, connect it. After connecting,
click [OK].
9)The following window will appear. Click [OK].
10)You are now ready to start the utility from the [File] menu.
Select [Quit] from the [File] menu.
If you want to configure settings for a SCSI device connected to the U2SCXU,
you need to select [Config Utility] from the [File] menu. Proceed to A.
If you want to update a firmware date on the U2SCXU, you need to select
[Firmware update Utility] from the [File] menu. Proceed to B.