Ratoc Systems U2SCXU - Manual (Page 62)

Macintosh
57
3-2-2.Using utility on MacOS X
You can configure settings for a SCSI device or update the firmware on the
U2SCXU with this utility. When you update the firmware, don’t remove the
SCSI device from the U2SCXU. You need to keep connecting the U2SCXU
to the SCSI device.
In order to use this utility, follow the steps through:
1)Insert the bundled CD-ROM.
2)Make sure the U2SCXU is removed from a Mac and double-click
[U2SCX Utility] at the [U2SCX_OSX] folder at the [U2SCX] folder.
3)The following window will appear. Click [OK].