Ratoc Systems U2SCXU - Manual (Page 17)

Windows
12
2-4.Installing on Windows Me
To install on Windows Me, follow the steps through:
The procedure of the driver installation is different as follows, depending on
whether you have daisy-chained some SCSI devices, or whether you have
connected at least on MO drive:
1)
If you have daisy-chained SCSI devices, or connected only one scanner,
proceed to Chapter 2-4-1 to install a RATOC original driver.
2)
If you have connected only one SCSI device such as HDD, Zip, Jaz, CD-
ROM, CD-R/RW, DVD-RAM/ROM/RW, proceed to Chapter 2-4-2 to in
stall a Microsoft Windows Me standard driver.
3)
If you try to use at least one MO, proceed to Chapter 2-4-3 first to install
a RATOC original driver. If you don’t install the driver, the system will
freeze up. Be sure to proceed to Chapter 2-4-3 before connecting it.