Raritan Computer DKSX440 - Manual (Page 22)

10 D OMINION KSX U SER M ANUAL
Physical Connections
Back Panel of Dominion KSX
AC Power Line
Attach the included AC power cord to Dominion KSX and into an AC Power Outlet.
Network Port
Connect a standard Ethernet cable from the network port to an Ethernet switch, hub, or router.
Power Control Port (optional)
To employ Dominion KSX’s integrated power control graphical interface, connect a standard Cat5 Ethernet cable
from the port labeled “Power Control” to the equivalently labeled port found on a Raritan Remote Power Control
unit (p/n PCR8, PCS12, or PCS20).
Note: This port works only with Raritan brand Remote Power Control units. You may use similar
products from other vendors by connecting them as a standard serial device. However, note that
Dominion KSX does not present a graphical interface to other vendors’ power control products,
only a standard command-line interface; Dominion KSX’s graphical power control interface
applies only to Raritan brand Remote Power Control units.