Raritan Computer DKSX440 - Manual (Page 37)

C HAPTER 3: R ARITAN R EMOTE C LIENT (RRC) 25
Compression Tab
Settings in the Compression Tab are adjustable via the RRC client, and therefore are not necessary for pre-
configuration in the Connection Profile. Should you wish to pre-configure these settings, however, refer to the
section in this chapter labeled “Remote Desktop: KVM Console Control, Connection and Video Properties.”
Security Tab
If you have configured your Dominion KSX unit to use a private group key, you must enter it here in order to be
authorized to initiate a connection with that Dominion KSX unit. Click on the [OK] button when you have
completed the fields.
When you have completed the Connect and Security screens, click on the [OK] button to finish creating the
connection.
Establishing a New Connection
To connect to a Raritan networked device, simply double-click on its entry in the RRC Navigator. You will be asked
to authenticate to the device.
Note: The default Dominion KSX login user name is <admin>, with the password <raritan>. This
user has administrative privileges. Passwords are case sensitive and must be entered in the exact
case combination in which they were created.
The default password <raritan> must be entered entirely in lowercase letters.
To ensure security, change the default username password as soon as possible.
If you do not see an entry for your Dominion KSX in the RRC Navigator, follow the instructions in the Creating
New Profiles section in this chapter to create a new connection profile for your Dominion KSX.
If you are having problems connecting to a Raritan device, be sure to check the following:
• Username / Password: Raritan usernames and passwords are case-sensitive.
• TCP Port: If you have configured your Raritan Device to use a non-default TCP Port, this information must be
entered into its connection profile.
• Firewall Settings: If you are accessing a Raritan Device through a firewall, that firewall must be configured to
allow two-way communication on TCP Port 5000 (or the custom TCP Port to which your Raritan Device has
been configured).
• Security Key: If you have configured your Raritan Device to require a group security key, that key must be
entered into the device's connection profile.
Closing a Remote Connection
When you would like to terminate your connection to a Dominion KSX unit, simply right-click on the device entry
in the RRC Navigator, and select Disconnect.