Raritan Computer DKSX440 - Manual (Page 62)

50 D OMINION KSX U SER M ANUAL
Note: Once Restrict remote IP address has been enabled, an entry must be made in at least one of
the IP Mask fields, since 0.0.0.0 is an invalid IP address.
• Private key: Enter a private key password. This private key acts as a second level of password protection. Only
remote users who know the private key password, in addition to their user name and password, can log in and
connect to Dominion KSX.
− Confirm private key: Enter private key password again for re-confirmation.
Note: Private key passwords are case sensitive. For remote user login, passwords must be entered
by the user in the exact case combination in which they were created here.
Note: Private key passwords must be alphanumeric. Special characters cannot be used.
Performance Settings
The Performance Settings screen is used to set up Dominion KSX’s video data transfer and bandwidth parameters.
• Pause video stream for idle users: Pausing the flow of video data during periods of prolonged inactivity will
prevent an inactive user from needlessly consuming bandwidth.
− Never (default): Video data will continually be sent to Remote PC, constantly updating the screen, even if
the remote user is Idle, sending no active input to Dominion KSX.
− After 5, 15, 30, 60, or 120 minutes: Video data flow to the Remote PC will pause after the selected time
period has passed with no active input from the Remote PC.
• Maximum total Bandwidth usage: Sets an upper limit to the amount of bandwidth that can be consumed by
this one Dominion KSX unit.
− No Limit (default): Dominion KSX can consume as much bandwidth as needed.
− 10, 5, 2, or 1 megabit or 512, 256, 128 kilobit: Total bandwidth available to be consumed by this
Dominion KSX unit is limited to the selected quantity. The lower the bandwidth allowed, the slower the
performance that may result.
• Maximum Bandwidth per user: Sets an upper limit to the amount of bandwidth that can be consumed by each
user logged onto this one Dominion KSX unit.
− No Limit (default): Each active user can consume as much bandwidth as needed.
− 10, 5, 2, or 1 megabit or 512, 256, 128 kilobit: Bandwidth consumed by each active user during the
operation of this Dominion KSX unit is limited to the selected quantity. The lower the bandwidth allowed,
the slower the performance that may result.
Press <Ctrl+S> to save changes or <Esc> to cancel changes, and return to Configuration Menu. Saved Performance
Settings changes will not take effect until Dominion KSX is restarted.