Raritan Computer DKSX440 - Manual (Page 28)

16 D OMINION KSX U SER M ANUAL
Connect to Dominion KSX Remotely
Having completed the physical installation of Dominion KSX, you are now ready to establish an initial network
connection. Below are basic instructions for doing so. Please see Chapter 3: Raritan Remote Client for detailed
instructions, being sure to review the “KVM Session Properties” and “Color Calibration” sections to optimize your
Dominion KSX performance for Target KVM Servers.
Launch Raritan Remote Client (RRC)
1. Log into any Windows-based computer with network access to Dominion KSX.
2. If you are using Windows NT, 2000, XP, or 2003, ensure that you are not a “restricted” user.
3. Launch Microsoft Internet Explorer. Ensure that your Internet Explorer security settings allow the download
and execution of ActiveX controls.
Note: The Windows default security setting, “Medium”, will suffice.
4. In the text field found on the Internet Explorer “Address” bar, type in the IP address you assigned to Dominion
KSX in Step 6 of the previous section, “Initial Configuration.” Press the <Enter> key to load and launch the
web access client, called Raritan Remote Client.
5. After launching Raritan Remote Client, you will see a tree list on the left-hand side of the screen with a list of
all automatically-detected Raritan devices found on your subnet. If you do not find your Dominion KSX unit
listed there by name, create one manually by selecting Connection
→ New Profile on the menu bar. See
Chapter 3: Raritan Remote Client, RRC Navigator and Creating New Profiles for more information.
6. Double-click on the entry corresponding to your Dominion KSX unit, found on the left-hand side of Raritan
Remote Client.