Raritan Computer DKSX440 - Manual (Page 40)

28 D OMINION KSX U SER M ANUAL
Remote Desktop: KVM Console Control
After using the RRC Navigator to establish a connection with a Dominion KSX unit (see the previous section:
Establishing a Connection), the Navigator entry corresponding to the Dominion KSX unit will expand to show all
ports on the Dominion KSX enabled for remote access.
Remote KVM ports are designated with the following icon:
To establish a remote KVM console connection, simply double-click on the KVM port that you would like to
control.
Upon connection, Dominion KSX displays the real-time video output by the Target KVM Server that is connected
to your Dominion KSX KVM port. This video is compressed and encrypted according to the configuration settings
specified by the administrator (see Chapter 4).
Once connected to a Target KVM server, you obtain complete, low-level control of the KVM console as if you were
physically located next to the server.
To switch to a different KVM port, simply double-click on the corresponding entry in the RRC Navigator.