Omron ZS-MDC - Manual (Page 28)

2-4
Sect
io
n 2
INSTA
L
LATION &
CONN
ECTION
ZS-MDC
User’s Manual
Section 2
Multi-Controller
Installing the Multi-Controller
The Multi-Controller performs logical operations on the sensing information obtained from
multiple connected Sensor Controllers. Up to 9 Sensor Controllers can be gang-mounted.
For details on the Sensor Controller and Sensor Heads, refer to the User's Manual for the
Sensor Controller.
Provide power to all connected Sensor Controllers.
■ About channel No. when controllers are gang-mounted
When performing operation from SmartMonitor Zero or an external device, select the
controller to be set up by its channel No. The following shows how channel Nos. are
assigned when Sensor Controllers are gang-mounted.
Multi-Controller
CH0 Sensor Controller
CH1 Sensor Controller
CH2 Sensor Controller
CH3 Sensor Controller
CH9