Omron ZS-MDC - Manual (Page 72)

4-16
Sect
ion 4
APPLICATION SETTING EX
AMPLE
S
ZS-MDC
User’s Manual
Section 4
Measuring the Twist of a Workpiece
• To output the judgment result of the operation
[I/O SET]-[I/O SET]-[OUT]
6.
Select [TASK3] so that the judgment on the
twist can be output.
• To linear-output the operation result
[I/O SET]-[I/O SET]-[ANALOG]
6.
Select [TASK3] so that the twist value can be
linear-output.
The calculation results of each CH can be batch-acquired if you use the communication command.
▲
1 TASK1
3 TASK3
2 TASK2
4 TASK4
▲
1 TASK1
3 TASK3
2 TASK2
4 TASK4