Omron ZS-MDC - Manual (Page 69)

Sect
ion 4
APPLICATION SETTING EX
AMPLE
S
Section 4
Measuring the Average Height
4-13
ZS-MDC
User’s Manual
[SENSING]-[CALC]-[CALC]-[AVE]
3.
Set input A to input C for calculating the
average to ON, and other inputs to OFF.
• To output the judgment result of the operation
[I/O SET]-[I/O SET]-[OUT]
4.
Select [TASK1] so that the judgment on the
average value can be output.
• To linear-output the operation result
[I/O SET]-[I/O SET]-[ANALOG]
4.
Select [TASK1] so that the average value can
be linear-output.
The calculation results of each CH can be batch-acquired if you use the communication command.
▲
1 INPUT A
3 INPUT C
2 INPUT B
▲
1 TASK1
3 TASK3
2 TASK2
4 TASK4
▲
1 TASK1
3 TASK3
2 TASK2
4 TASK4