Setting flow – Omron ZS-MDC User Manual
Page 40
3-2
Section 3
SETUP
ZS-MDC
User’s Manual
Section 3
Setting Flow
Setting Flow
Preparation for Measurement
Section 2
Installation & Connection
Gang-mount Sensor Controller to Multi-
controller.
Setting of Measurement Conditions
Power ON
Installation and Connection
Save Setup
Setting the Sensor Controller to obtain sensing information from
Set the Sensor Controller to obtain sensing
information from and operations to be
performed.
Output Results
Save the data you have set.
Save Setup Data
Setting output processing
Set how measured information is to be
processed for outputting the required values.
Set the filter conditions for processing
measured information.
Setting Filter Function
Sensor Controller User's Manual,
Section 3 Setup
Sensor Controller User's Manual,
Section
3
Setup
Sensor Controller User's Manual,
Section 3 Setup
Sensor Controller User's Manual,
Section 3 Setup
Sensor Controller
User's Manual,
Section 3 Setup
Setting the Threshold
Set the threshold value for judging measured
values.
Set how measured values are to be output.
External I/O
After you have made or changed settings,
be sure to save the setup data. All settings
will be deleted if you turn the power OFF
without saving the data.