Omron ZS-MDC - Manual (Page 48)

3-10
Section 3
SETUP
ZS-MDC
User’s Manual
Section 3
About Setup
I/O SET NO-MEAS CLAMP KEEP, CLAMP -
JUDGE HYS 20 µm 0 to 999.999 -
TIMER OFF OFF, OFF DELAY (1 to 5000ms),
ON DELAY (1 to 5000ms), ONE
SHOT (1 to 5000ms) -
ANALOG FOCUS OFF OFF, ON -
ADJUST OFF OFF, ON (-999 to 999) -
INPUT IN0 ON OFF, ON -
IN1 ON OFF, ON
IN2 ON OFF, ON
IN3 ON OFF, ON
I/O SET IN TASK TASK (TASK1 to 4, ALL TASK,
NONE), FUNC (NORMAL, BANK) p.3-16
OUT TASK1 TASK1 to TASK4, NONE
ANALOG TASK1 TASK1 to TASK4, NONE
DIGITAL - LOG1 to 9(NONE, INPUT A to
INPUT I, TASK1 to TASK4)
BANK CHANGE BANK1 BANK1, BANK2, BANK3, BANK4 -
CLEAR - (Initializes bank settings.) -
SYSTEM SAVE - (Saves Multi-Controller settings.) -
INIT (Initializes Multi-Controller settings.) -
INFO
CYCLE - (Displays the current measurement
cycle.) -
VERSION - (Displays the Multi-Controller version.) -
COM
(RS-232C)
LENGTH 8BIT 8BIT, 7BIT -
PARITY NONE NONE, ODD, EVEN -
STOP 1BIT 1BIT, 2BIT -
BAUDRAT 38400 9600, 19200, 38400, 57600,
115200 -
DELIMIT CR CR, LF, CR+LF -
COM MODE COMPWAY COMPWAY, NORMAL -
NODE 0 0 to 16 -
KEYLOCK OFF OFF, ON -
ZERORST OFF OFF, ON -
LANGUAG Japanese Japanese, English -
Settings Default Value Option/Range Pages