Caution, Warning – Quadra-Fire MTVERNON-AE-MBK User Manual

Page 37

Advertising
background image

R

R

R

August 13, 2009

7034-106F

Page 7

Mt. Vernon Pellet Stove (AE)

8. Cleaning the Glass

Frequency:

When clear view of firepot becomes

obscure

By:

Homeowner

a. Be sure the wall control screen says OFF and the

appliance is allowed to cool.

b. Clean glass with a non-abrasive commercially

available cleaner. Wipe down with dry towel.

Handle glass assembly with care.

When cleaning glass door:

• Avoid striking, scratching or slamming

glass.

CAUTION

• Do NOT clean glass when hot.
• Do NOT use abrasive cleaners.
• Use a hard water deposit glass cleaner on white film.
Refer to maintenance instructions.

Handle glass doors with care.
• Inspect the gasket to ensure it is

undamaged.

• Do NOT strike, slam or scratch glass.
• Do NOT operate appliance with glass door

removed, cracked, broken or scratched.

WARNING

9. Door Latch Inspection

Frequency:

Prior to heating season

By:

Homeowner

The door latch is non-adjustable but the gasketing between

the glass and firebox should be inspected periodically to

make sure there is a good seal. If the gasket is frayed or

damaged, replace with a new one.

7. Cleaning the Hopper

Frequency:

Monthly or after burning 1 ton of fuel,

(aprx 50 bags) or when changing fuel types

By:

Homeowner

a. Be sure the wall control screen says OFF and the

appliance is allowed to cool.

b. After burning approximately 1 ton of fuel you will need to

clean the hopper to prevent sawdust and/or fines build-

up.

c. A combination of sawdust/fines and pellets on the auger

reduces the amount of fuel supply to the firepot.

d. This can result in nuisance shut downs and misstarts
. •. Empty the hopper of any remaining pellets.

•. Vacuum the hopper and feed tube.

Clean-Out Cover

a. Be sure the wall control screen says OFF and the appli-

ance is allowed to cool.

b. Open the clean out cover. Figure 38.1.
c. Sweep out any ash build-up.

12. Cleaning the Top Vent Adapter (if installed)

Frequency:

As Needed

By:

Homeowner

10. Cleaning Exhaust Blower - Requires No

Lubrication

Frequency:

Yearly or as needed

By:

Homeowner

a. Be sure the wall control screen says OFF and the

appliance is allowed to cool.

b. Use a soft brush and vacuum to clean the

propellers.

11. Cleaning Convection Blower - Requires No

Lubrication

Frequency:

Yearly or as needed

By:

Homeowner

a. Be sure the wall control screen says OFF and the

appliance is allowed to cool.

b. Use a soft brush and vacuum to clean the

propellers.

Figure 37.1

Advertising