Topcon GTS-823A User Manual
Page 62
5-4
5 PROGRAM MODES
5
Press [F6](SET) key.
Coordinate of P1 will be displayed.
[F6]
6
Press [F5](YES) key.
Coordinate of P1 will be decided.
[F5]
The display return to main menu.
Turn power off and move instrument to P1
( Prism P1 move to P0).
Power off
Move to
P1
7
After the instrument is set up at P1, turn
power on and be measurement possible.
Power on
Select
program
8
Press [F2](STORE) key.
[F2]
9
Press [F2](Recall NEZ) key.
10
Collimate P
0
, the former instrument point.
[F2]
Collimate
P
0
11
Press [F5](YES) key.
[F5]
The coordinates at P1 and direction angle
toward P
0
are set.
The display return to main menu.
12
Repeat the procedure
1
~
11
as much as you
wish.
*1)To reset the instrument height or prism height, press [F5](HT) key.
Store NEZ
N : 123.456 m
E : 12.345 m
Z : 1.234 m
>
SET OK? YES NO
Complete
Programs
F1 BS p 4/7
F2 STORE p
F3 REM p
F4 MLM p MORE
Retaining a Coordinate
1.Store NEZ
2.Recall NEZ
Recall NEZ
HR: 300°10'20"
>
Set OK?
YES NO
Complete