Tyco LPE-200 - Manual (Page 44)

44
FIXED P1 A Priority 1 group has been pre-
programmed into the radio. A new
Priority 1 group cannot be selected.
FIXD LST A fixed scan list has been pre-
programmed into the radio. It is not
possible to change the list without
reprogramming the radio.
Note: To quickly view multiple group scan
status, press either
6 or the 9 key. Then
slowly but consistently rotate the group knob.
Each group status will appear on the display.
Deleting Groups from a Scan List
SCAN Model Radios
1. With scan operation turned off, select the
desired group to delete from the selected
trunked system group scan list.
2. Press A. The current status of the group is
displayed for a time-out period.
3. While the current status is displayed, press A
until the group from the scan list is "blank". The
sequence is "blank", , , , "blank". Any
group that is not in a trunked system group scan
list will show a "blank" for the time-out period
when it is the selected channel.