Tyco LPE-200 - Manual (Page 84)

84
SCAN DIS The radio is not programmed to scan.
FIXD LST A fixed scan list has been pre-
programmed into the radio. It is not
possible to change the list without
reprogramming the radio.
DELETING CHANNELS FROM A SCAN LIST
1. With scan operation turned off select the desired
channel to delete from the selected conventional
system's channel scan list.
2. Press A (Scan) or 9 (System). The
current status is displayed for a time-out period.
3. Press A or 9 during this time-out period to
delete the channel from the scan list. , turns
off. Any channel that is not in a conventional
system channel scan list will show a "blank" for
the time-out period when it is the selected
channel.
Nuisance Delete
A channel can also be deleted from the scan list,
if it is not the currently selected channel, by pressing
A (scan) key during scan operation while the
radio is displaying the unwanted channel. The
channel will be deleted from the system's channel
scan list in the same manner as if done using the
steps above. Deletions done in this manner will not
remain deleted if the radio is turned off and then
back on.