Tyco LPE-200 - Manual (Page 56)

56
Press the M key again then use the <,
> keys to scroll through the list of prestored
numbers.
2. Press and release the PTT button. When the
radio is clear to transmit, turns on, turns off
and the channel access tone sounds. Line one
shows the accompanying name selected from
the list of stored numbers. The message
*PHONE* displays on line two. The radio then
automatically transmits the programmed number
stored in the special call queue.
3. A telephone ring will be heard from the speaker.
When someone answers the phone, press the
PTT button and speak into the microphone.
Release the PTT button to listen to the callee.
Unsuccessful interconnect signaling returns the
radio to the normal receive mode and the
number remains displayed until the special call is
cleared or the time-out expires or another group
or system is selected. Terminate a call by
pressing the CLEAR/MONITOR button.
In half-duplex mode, only one person may
talk at a time. The radio PTT button needs to
be pressed in order to communicate to the
individual called and released for the
individual called to be heard.
4. To terminate the call, momentarily press the
CLEAR/MONITOR button.
NOTE