Tyco LPE-200 - Manual (Page 91)

91
2. Align the battery pack tabs with the battery
mounting plate slots on the back of the radio
(see Figure 7).
3. Insert the tabs into the slots, push down and
slide the battery toward the battery latch until the
battery latch clicks into place.
1. While pressing
the Battery Pack
Release Button
4. When replacing the battery pack, align the
ribs on the sides of the battery pack with the
slots in the sides of the radio. Push down
and slide the battery pack into place.
2. Take hold of the Battery Pack and
slide it back until it stops.
3. Lift up and separate the battery
pack from the radio.
Figure 7 - Installing and Removing
the Battery Pack
REMOVING THE BATTERY PACK
1. Ensure the POWER ON-OFF/VOLUME knob is
in the OFF (detent) position.