Tyco LPE-200 - Manual (Page 81)

81
•
Entering individual call mode.
• A new emergency assignment has been
received.
•
An emergency declared or cleared.
• Receiving an individual or phone call.
• Receiving Agency, Fleet or System All Call.
•
Pressing S or 3 to turn scan on or off.
DATA LOCKOUT MODE
During the voice call scan hang time (pre-
programmed) the radio will not receive data calls.
CONVENTIONAL OPERATION
The radio functions in the conventional mode
when using conventional communications channels
(non-trunked). Each channel consists of a preset
frequency pair for transmit and receive during
repeater operation, or a single frequency for both
transmit and receive during talk-around (no repeater)
operation. To use this mode, the operator selects a
conventional system which includes one or more
conventional channels. Each conventional channel
may have one or more features, such as Channel
Guard, programmed when the channel is selected.
The CLEAR/MONITOR button unmutes the
receiver so activity on the selected channel can be
monitored. When pressed and held for
approximately 3 seconds this button toggles
conventional channel decoding (Channel Guard,