Tyco LPE-200 - Manual (Page 58)

58
In half-duplex mode, only one person may
talk at a time. The radio PTT button needs to
be pressed in order to communicate to the
individual called and released for the
individual called to be heard.
4. To terminate the call, momentarily press the
CLEAR/MONITOR button.
DTMF Overdial / Conventional Mode Telephone
Interconnect
Once the radio has established a connection to
the public telephone system, it may be necessary to
"over-dial" more digits to access banking services,
answering machines, credit card calls or other types
of systems that require DTMF (Dual-Tone Multi-
Frequency) access digits.
Overdial operation can also be used to initiate a
telephone interconnect call via DTMF signaling if a
dial tone has already been accessed on the system.
This is the method that is used for making a
telephone interconnect call while operating in the
conventional mode but will also function in trunked
mode if a dial tone is directly accessible.
Telephone numbers and other number
sequences for overdialing can be stored in the phone
list when programming the radio. These numbers are
accessed by pressing
M, then following the
selection mode rules.
NOTE