Tyco LPE-200 User Manual
Page 51
51
To respond after the call-back time-out, press the
# key. The radio's display will show the callers ID
on the first line and WHCI=1 on the second line.
Pressing the PTT button at this point will initiate an
individual call back to the original caller.
The radio stores the ID's of the last 10 callers in
the Calls Received List as shown. Individual calls are
stored in the top half of the list (1-10) and Group
calls are stored in the bottom half of the list (1-10).
The most recent call is stored in position 1, the
second most recent call is stored in position 2 etc.
To access this list, press the
# key twice. Use
the
< > keys to scroll through the list.
Pressing the
M key will display the time elapsed
since the call was received. After pressing
# an
example of the display is as follows