TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 16)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
Chapter 4. Quick Installation Guide
After connecting the Router to your network, you should configure it. This chapter describes how
to quickly configure the basic functions of your Router. These procedures only take you a few
minutes. You can access the Internet via the Router immediately after successfully configuring.
4.1 Configure the Router
1. Login to Home Page
To use the web-based utility, launch a suitable web browser and direct it to the IP address of the
Router. Type http://192.168.1.1 in the address bar of the browser.
A dialog box prompts for User name and Password. Type in the default User name admin as well
as Password admin and then click the OK button to access the Quick Setup screen.
Figure 4-1
Note:
Do not mix up the user name and password with your ADSL account user name and password
which needed for PPP connections.
2. The default screen shows as below. Change the VPI or VCI values which are used to define
a unique path for your connection. If you have been given specific settings for this to
configuration, type in the correct values assigned by your ISP. Click “Next”.
15