TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 30)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
Figure 5-7
1) Enter the PPP Username and PPP Password provided by your ISP exactly, select the
Authentication Method in the drop-down list, the default method is AUTO, you can
leave it as a default setting.
2) If you wish to active the “Connect on Demand” function, click the Dial on the demand
radio-button, and enter the Inactivity timeout value, the range is from 1 to 4320 minutes.
Then the Router will cut off the Internet connection after it has been inactive for a specific
period of time (Inactivity Timeout). If your Internet connection is terminated due to
inactivity, Connect on Demand enables the Router to automatically re-establish your
connection as soon as you attempt to access the Internet again.
3) If you are required to use a permanent IP address, select the option Static IP Address
and enter the value in the text box.
4) Click the Next button to go to the next screen below (shown in Figure 5-8), or else click
the Back button to return to the previous screen to make modifications.
Note:
If you are not sure about the PPP IP extension and PPP Debug Mode, please don’t select this
option.
29