TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 74)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
Figure 5-71
¾ Refresh: Click the button, the information in the table will be updated.
¾ Close: Click the button, the screen will be closed.
To Configure the System Log Settings:
Click the Configure System Log button (shown in Figure 5-70), you will see the screen below
(shown in Figure 5-72).
Figure 5-72
¾ Disable/Enable: Select the Enable to log the events, if you don’t want to log these events,
please select Disable.
¾ Log Level: Select the Log level in the drop-down list, for the Log level, all events above or
equal to the selected level will be logged.
¾ Display Level: Select the Display level in the drop-down list, for the Display Level, all logged
events above or equal to the selected level will be displayed.
¾ Mode: Select the mode to record the events. If the selected mode is Local, events will be
73