TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 53)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
Figure 5-38
To activate RIP for the device, select the Enabled radio-button for Global RIP Mode. To
configure an individual interface, select the desired RIP version and operation, followed by placing
a check in the Enabled checkbox for the interface.
If you are sure about the settings, click the Save/Apply button to save the configuration.
5.4.7 DNS
When you select the connection type PPPoE, PPPoA, MER or IPoA for WAN configuration, you
will see the DNS menu in the Web-based Utility (shown in Figure 5-39). It includes DNS Server
and Dynamic DNS submenus.
Figure 5-39
52