TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 36)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
Figure 5-15
¾ IP Address: You can configure the Router’s IP Address and Subnet Mask for LAN Interface.
„ IP Address: Enter the Router’s local IP Address, then you can access to the Web-based
Utility via the IP Address, the default value is 192.168.1.1.
„ Subnet Mask: Enter the Router’s Subnet Mask, the default value is 255.255.255.0.
¾ Enable UPnP: If you need the UPnP function, select the check box to enable it.
¾ Enable IGMP Snooping: If you select the option, please choose the IGMP Mode:: Standard
Mode or Blocking Mode.
¾ DHCP Server: These settings allow you to configure the Router‘s Dynamic Host
Configuration Protocol (DHCP) server function. The DHCP server is enabled by default for
the Router’s Ethernet LAN interface. DHCP service will supply IP settings to computers which
35