TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 76)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
Note:
The Connection Request User Name and Connection Request Password used for ACS log on the
Router and manage it.
¾ GetRPCMethods: Click this button to contact with ACS.
Note:
RPC- Remote Procedure Calls
Select the desired values and click "Save/Apply" to configure the TR-069 client options.
5.7.4 Internet Time
Choose “Management” Æ“Internet Time”, you can see the Time settings screen, this screen
(shown in Figure 5-74) allows you to set the time for the Router.
Figure 5-74
To set the Router’s time:
1. Select automatically synchronize with Internet time servers.
2. Select the First NTP time server and/or the Second NTP time server in the drop-down list
severally.
3. Select your local time zone.
4. Click Save/Apply button.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your
time zone once you login to the Router successfully, if not, the time limited on these functions will
not take effect.
The time will be lost if the Router is turned off.
The Router will obtain the time automatically from Internet if it has already connected to Internet.
5.7.5 Access Control
This section provides three submenus including Services, Addresses and Password (shown in
Figure 5-75), the detailed descriptions are provided below.
75