TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 39)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
button, then the corresponding entry will be deleted in the table.
To setup a virtual server entry:
1. Click the Add button on the screen above (pop-up Figure 5-17), and then you will set the
new Virtual Server in the next screen (shown in Figure 5-18).
Figure 5-18
2. Select the service which you want to use from the drop-down list. If the list does not have the
service you need, type the name of the custom service in the text box.
3. Type the IP Address of the computer in the Server IP Address text box.
4. Enter the External Port Start, External Port End, Internal Port Start and Internal Port End in
the table, and then select the protocol used for this Virtual Server, TCP, UDP or All.
5. Click the Save/Apply button to enable virtual server.
Note:
If you select the service from the drop-down list, the External Port Start, External Port End,
Internal Port Start, Internal Port End and the Protocol will be added in the table automatically.
38