TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 68)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
Note:
The form of MAC Address must be “xx:xx:xx:xx:xx:xx”, like “00:13:0A:55:FF:09”.
Figure 5-60
When you finished making changes to the MAC Filter List screen, click the Save/Apply button to
save the changes.
5.5.4 Wireless – Advanced
Choose “Wireless” Æ”Advanced”, you will see the screen of Wireless-Advanced settings shown
as below.
Figure 5-61
¾ Channel: Select the channel you want to use from the drop-down List of Channel. This field
determines which operating frequency will be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access point.
¾ Fragmentation Threshold: This value specifies the maximum size for a packet before data
is fragmented into multiple packets. If you experience a high packet error rate, you may
slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low
may result in poor network performance. Only minor reduction of the default value is
recommended. In most cases, it should remain at its default value of 2346.
¾ RTS Threshold: Should you encounter inconsistent data flow, only minor reduction of the
67