TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 42)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
Figure 5-21
To add a new DMZ Host :
You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you
set on this page.
Note:
DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must
have its DHCP client function disabled and should have a new static IP Address assigned to it
because its IP Address may change while using the DHCP function.
5.4.3.4. ALG
Choose “Advanced Setup” Æ“NAT”Æ“ALG”, you can Enable SIP (Session Initiation Protocol) on
the ALG (Application Level Gateway) screen (shown in Figure 5-22).
Figure 5-22
5.4.4 Security
When you select the Enable Security function (shown in Figure 5-11) for the connection type of
MER or IPoA for the WAN Setup, or when you setup Bridge, PPPoA or PPPoE mode for WAN
interface, you will see the Security menu in the Web-based Utility (shown in Figure 5-23). It
includes IP Filtering, MAC Filtering (only effective in Bridge mode) and Parental Control
submenus.
41