TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 60)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
5.5.2 Wireless – Security
Choose “Wireless” Æ”Security”, you will see the screen of Wireless-Security settings shown as
below.
Figure 5-47
This page allows you to configure security features of the wireless LAN interface. You can set the
network authentication method, selecting data encryption, specify whether a network key is
required to authenticate to this wireless network and specify the encryption strength.
¾ Network Authentication: Select an authentication type from the drop-down list. Options
available are: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK, Mixed WPA2/WPA, and
Mixed WPA2/WPA-PSK.
Note:
For most users, it is recommended to use the default Wireless LAN Performance settings. Any
changes made to these settings may adversely affect your wireless network. Under certain
circumstances, changes may benefit performance. Carefully consider and evaluate any changes
to these wireless settings.
5.5.2.1. WEP Encryption
WEP is a basic encryption method offering three levels of encryption, 152-bit is stronger than
64-bit and 128-bit encryption. If you select enable from the drop-down list of WEP Encryption,
you will see the screen shown as below.
59