TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 48)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
To setup a Parental Control rule:
1. Click the Add button (pop-up Figure 5-30), and then you will set the new rule in the next
screen (shown in Figure 5-31).
Figure 5-31
2. Enter the User Name of the LAN device connected to the Router.
3. To restrict the device where the browser is running, select the Browser's MAC Address
radio-button, its MAC Address has automatically displayed in the text box. To restrict other
LAN devices, click the Other MAC Address radio-button and enter the MAC address of the
other LAN device.
4. Select the day when the rule will take effect in the table.
5. Enter the Start Blocking Time and End Blocking Time in the text box separately, and then
the device controlled will then be unable to connect to the internet during that time.
6. Click the Save/Apply button to save this entry.
5.4.5 Quality of Service
When you select Enable Quality Of Service check box (shown in Figure 5-5) for the WAN
configuration, the Quality Of Service menu will be added to the Web-based Utility. Choose
“Advanced Setup”
Æ“Quality Of Service”, you can configure QoS (Quality of Service) on the
screen (shown in Figure 5-32).
47