TP-Link 108M Wireless ADSL2+ Router TD-W8920G - Manual (Page 25)

TD-W8920G 108M Wireless ADSL2+ Router User Guide
Chapter 5. Basic Router Configuration
This User Guide recommends using the “Quick Installation Guide” for first-time installation of the
TD-W8920G 108M Wireless ADSL2+ Router. For advanced users, if you want to know more
about the TD-W8920G and make use of its functions adequately, you need to read this chapter
and configure the Router’s advanced settings though the Web-based Utility.
This chapter will describe each web page on the Utility and each page’s key functions. The Utility
can be accessed via your web browser though the use of a computer connected to the Router.
You may configure the TD-W8920G 108M Wireless ADSL2+ Router’s settings though the
Web–based Utility.
5.1 Login
After your successful login, you will see the Login screen (shown in Figure 5-1).
Figure 5-1
There are six main menus shown on the screen, they are Device Info, Quick Setup, Advanced
Setup, Wireless, Diagnostics and Management. Additional menus will be available after you
click one of the main menus. Click one of the main menus, and you will be able to configure the
corresponding function.
5.2 Device Info
Choose “Device Info” menu, there are six submenus under the main menu: Summary, WAN,
Statistics, Route, ARP and DHCP. This Device Info section mainly introduces the elementary
information about the Router and its current settings in use. Click any of them, and you will be
able to view the corresponding information.
Choose “Device Info” Æ“Summary”, you will see the Summary screen (shown in Figure 5-2)
24