TROY Group MAN-EXT2000 User Manual
Page 132
10-2 DLC Configuration
4.
Select DLC Protocol. Click Continue (for 3.xx
systems) or Close (for 4.xx systems).
5.
Reboot your system to make the change take effect.
Windows NT 4.xx Printer Setup
1.
From the Start menu, select Settings and then Printers.
Double click on Add Printer.
2.
Select My Computer and then click Next.
3.
Select Add a Port.
4.
Select Hewlett-Packard Network Port and then click
New Port
5.
A list of available print server Ethernet addresses
appears in the larger box under Card Address. Select
the address of the desired print server (the address is
on the label affixed to the print server, or it can be
gotten through the self-test page). The selected print
server address will then appear in the smaller box
under Card Address.
6.
Type in any desired name for the port (the name must
not be the name of an existing port or DOS device,
such as LPT1) and click OK and Close.
7.
The Printer Ports menu will appear. The name you
selected in step 6 will appear as a checked port in the
list of available ports. Click Next.
8.
Select the desired printer manufacturer and model and
click Next.