TROY Group MAN-EXT2000 - Manual (Page 219)

Using Services B-3
10 \FF\04\FF\05\FF\06\FF\08 Enter Language=PostScript
11 \0C Formfeed
To define a new string, use the command:
SET SERVER STRING number “string”
where number is the number of the string (12 through 31)
and string is the desired string (must be enclosed in quotation
marks).
A given string can include hexadecimal characters by
preceding the value with a “\” character. The next two
characters after the “\” will then be interpreted as the
hexadecimal value of a character. For example, to specify
<ESC>E as string number 12, you would enter:
SET SERVER STRING 12 “\1BE”
Please note that when you associate a string number with a
service, the new string number completely replaces any
previous string numbers. Also, if you are using one of the
predefined PostScript or PCL services, the new string will
nullify the language switching function of these services.
However, you can combine several string numbers together
by preceding the string number with “\FF”. For example, if
you defined string number 21 as "\1B" (<ESC>), and string
number 22 as “&l1O”, you can create a new string number
23 that contains <ESC>&l1O (the PCL landscape mode
command) by entering:
SET SERVER STRING 23 “\FF\15\FF\16”