TROY Group MAN-EXT2000 - Manual (Page 52)

4-6 TCP/IP Network Configuration
systems, as well as many VMS-based TCP/IP software
packages (for example, UCX, TGV Multinet, etc.).
Such systems generally use a printer setup program to
define the service name (remote printer), the TROY
XCD print server name (remote machine) or IP address,
and the local queue name (spool directory).
HP/UX Configuration
In the case of HP/UX 10.xx, the sam program is used to
set up the remote printer. The steps are as follows:
- Execute the sam program. When you get a list of
options, select Printers and Plotters.
- Select LP Spooler.
- Select Printers and Plotters.
- Select Actions and then Add Remote Printer/Plotter.
- Enter any name as the Printer Name (this will
be the name of the print queue)
- Enter the IP address of the print server as the
Remote System Name
- Enter the desired print server service name as the
Remote Printer Name.
- Check the box next to Remote Printer is on
BSD System.
- You may accept the default values for the
remaining items.
- Click OK to configure the printer.
- You should now be able to print using the
lp -d
command with the printer name.
If you are using the HP Distributed Print Service, the
configuration procedure is slightly different because
you are sending the print jobs to a file server, which in
turn spools the jobs to the print server. You must