TROY Group MAN-EXT2000 - Manual (Page 50)

4-4 TCP/IP Network Configuration
BINARY_S1 Binary (serial port)
TEXT_S1 Text (serial port)
BINARY_P2 Binary (second parallel port)
TEXT_P2 Text (second parallel port)
BINARY_S2 Binary (second serial port)
TEXT_S2 Text (second serial port)
You may set up multiple print queues on your UNIX host
computer for the same TROY XCD print server, each
with a different service name (for example, one queue for
binary graphics jobs and one for text jobs). Refer to
Appendix B for additional information on using services.
3. Note: This step applies to the majority of UNIX
systems, including Sun OS (but not Solaris 2.xx),
Silicon Graphics (lpr/lpd option required), DEC
ULTRIX, DEC OSF/1, and Digital UNIX. SCO UNIX
users should follow these steps, but should also refer to
the SCO UNIX Configuration section in section 3-A.
Users of RS/6000 AIX, HP/UX, Sun Solaris 2.xx, and
other systems that do not use the printcap file should
skip to section 3-A.
Configure the /etc/printcap file on each host
computer to specify the local print queue, the TROY
XCD print server name (also called remote machine or
rm), and the TROY XCD print server service name
(also called remote printer, remote queue, or rp), and
the spool directory.
An example of a typical printcap file is as follows:
laser1|Printer on Floor 1:\
:lp=:\
:rm=XCD_003C51:\
:rp=TEXT_P1:\
:sd=/usr/spool/lpd/laser1: