TROY Group MAN-EXT2000 - Manual (Page 207)

Command Summary A-5
SET PORT <parallelportname> DMA [EN|DIS]
Enables/disables DMA support on parallel port (not available on Pony
Print Server Plus or XConnect II Lite)
SET PORT <parallelportname> FSTB [EN|DIS]
Enables/disables fast strobe mode support on parallel port
SET PORT <parallelportname> NBUF [EN|DIS]
Enables/disables no buffer support on parallel port
SET PORT <serialportname> FLow [NO|XO|CT|DS]
Set serial port flow control to NONE, XON/XOFF, CTS, or DSR
SET PORT <serialportname> PArity <parity>
Set serial port parity to NONE, EVEN, ODD, MARK, or SPACE
SET PORT <serialportname> SIgnal [EN|DIS]
Enables/disables DTR signal check on serial port
SET PORT <serialportname> SPeed <baudrate>
Sets serial port baud rate from 300 - 57600 bits per second
SET PORT <serialportname> STop [1|2]
Sets serial port stop bits per character
SET PROtect <password>
Set console protection password to prevent access to SET commands (use
UNPROTECT command to access SET commands)
SET SERVEr DEscription
Sets node description string displayed with SHOW SERVER command
SET SERVEr STRing n "..."
Defines server BOT/EOT string (see Appendix B)
SET SERVIce <servicename> <protocol> [EN|DIS]
Enable or disables specified protocol on the specified service.
SET SERVIce <servicename> BOT nn
Set service BOT string to nn (see Appendix B)