TROY Group MAN-EXT2000 - Manual (Page 98)

5-26 Novell Network Configuration
For example, to set up remote printer 3 for an HP printer
with the TROY XCD print server XCD_00C3E4 using
the PSERVER NLM called XCD1PS, you would type:
SET NET NPRINTER XCD1PS 3 ON XCD_00C3E4_P1
SET NET RESCAN
EXIT
NOTE: The same service cannot be used for both
queue server mode and remote printer mode.
NOTE: If you want to enable remote printer
capabilities on services other than the default NetWare
services, you must define new services that are enabled
for NetWare and for the desired port. Refer to
Appendix B in this manual for information on how to
do this.
6. You must now unload the PSERVER NLM from your
NetWare file server console and then reload it in order
for the changes to take effect.
Configuring the Workstation
The final step is to configure the workstation(s) to print to
the TROY XCD print server. The TROY XCD print server
can be used with any workstation that supports either the
Novell or Microsoft client software.
Configuring the Workstation (Windows 95/98)
To use a NetWare print queue from a Windows 95
workstation, first make sure that the appropriate NetWare
drivers are installed. Then go to the Start button, choose
Settings, and then select Printers. Double click on the Add