2 biooptix 10 left-side controls and connections, 2 biooptix 10 left-side connections -4, 3 biooptix 10 left-side connections -4 – Teledyne 10 User Manual
Page 16: Table 1-3 biooptix 10 left-side connections
BioOptix™ 10
Section 1 Introduction
1-4
1.3.2 BioOptix 10 Left-side
Controls and
Connections
Figure 1-2
BioOptix 10 left-side connections
1
2
3
4
5
7
6
Table 1-3 BioOptix 10 Left-side Connections
Item Name
Description
1
Buffer A Inlet Ports
Ports to accept Buffer A solution for each channel.
2
Buffer B Inlet Ports
Ports to accept Buffer B solution for each channel.
3
Sample In Ports
Ports to accept sample for each channel.
4
Pump Purge Port
When the Mode Knob is in the Purge Pump position, pumped fluids are
diverted to this port, bypassing the column, detection, and collection.
5
Waste Ports
Connects to waste collection container(s). Connecting to separate contain-
ers allows isolation of waste buffers by each channel, which could be benefi-
cial should a purified sample fail to collect.
6
Internal Drain
Fluid from internal leaks exit the case through this opening. Internal leaks
are the result of pump seal failures due to neglected routine maintenance.
7
Power Switch
I = On
0= Off