Teledyne 10 - Manual (Page 59)

BioOptix™ 10
Section 4 System Maintenance
4-9
WARNING
Risk of damage to eyesight and skin. Wear ultraviolet (UV)
light eye protection and protect skin from exposure if the
deuterium lamp is operating.
CAUTION
Hot surfaces may cause burns. The UV lamp and nearby sur-
faces are hot.
To reset the circuit breaker, separate the pump and column
modules (see section 2). Locate the circuit breaker illustrated in
Figure 4-7 and press the button.
Figure 4-7 Circuit breaker location
The thermal breaker is located behind the waste port panel
(Figure 4-6). To reset the breaker, open the panel and locate the
reset switch (Figure 4-8). Insert a small flat blade screwdriver
into the opening and push the switch in to the right.
Figure 4-8 Thermal breaker location
Circuit Breaker
Thermal Breaker