TANDBERG E5714 - Manual (Page 186)

Operating the Equipment Locally
Page 4-108 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
Polarisation Option
To access the Polarisation option, press the Polarisation softkey in the
IRD Demod Menu
.
Table 4.136: Polarisation Options
Selected Option Description
Horizontal If LNB power is enabled, output +18V to signal horizontal polarisation.
Vertical If LNB power is enabled, output +13V to signal vertical polarisation.
Sat Input Option
To access the Sat Input option, press the Sat Input softkey in the
IRD
Demod Menu
.
Table 4.137: Sat Input Options
Selected Option Description
RF 1 Use Demod L-Band Input 1
RF 2 Use Demod L-Band Input 2
IF Use Demod IF input (M2/EOM2/QPSKDEMOD only).
Modulation Option
To access the Modulation option, press the Modulation softkey in the
IRD
Demod Menu
. If the IRD is in tracking mode this value is tied to that set for
the satellite modulator, and cannot be altered.
Table 4.138: Modulation Options
Selected Option Description
BPSK M2/EOM2/QPSKDEMOD and M2/ESO2/LSYM required.
QPSK
8PSK M2/EOM2/SATDEMOD and M2/ESO2/8PSKDEMOD required.
16QAM M2/EOM2/SATDEMOD and M2/ESO2/16QAMDEMOD required.
LNB Option
To access the LNB option, press the LNB softkey in the
IRD Demod Menu
.
Table 4.139: LNB Options
Selected Option Description
Active There is an LNB present.
Direct RF The Demod is being fed direct RF.